Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows to access the frame. Then, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and do an initial fitting. The corners of the sash must be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to remember that when it comes to upvc window repairs - visit the next page,, you should not be tempted to 'over-caulk and then make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with a breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical component, hinges can wear out over time. Changing a window hinge is an easy procedure, but it is easier to do with someone else to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture through our website can often solve the issue. We are more than happy to provide suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges because of wear and tear, could become misaligned. This can cause an opening to appear between the sash and the frame. If they're beyond repair, it could be necessary to get them re-aligned. The interlock, which is on the hinge side of the window and can be misaligned. Again, it's feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window repairs near me sill. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come an point at which it is more efficient to replace them than fix them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.