Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you plan to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is large, you might want to use security screens that has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a variety of issues such as sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows to access the frame. Then, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could also be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to repair the loose upvc window repair window handle yourself. The first step is to close the window and perform a test to ensure that it fits. The corners of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Based on the severity of the issue the caulking that was used up might need to be removed before a fresh layer is applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with ease It could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone helps hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or by poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide assistance.

Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again due to wear and tear can become misaligned, this causes a gap to form between the sash and the frame. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them realigned or replaced. Second, the interlock can be disaligned. This happens on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your upvc window repair windows, it's recommended to seek assistance from a professional as soon as you can.