Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly upvc window repair windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into frames of the past easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this situation, you will need to locate some plastic spacers to help the new pane to fit properly into the window frame.

If you plan to try to remove the window panes by yourself, it is essential to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll have to open the window to access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it could also be due to the handle mechanism getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. You'll first need to close the window and then perform a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze It could be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change a window hinge however it is easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or by inadequate installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. First, the hinges due to wear and tear can become misaligned, this can cause an opening to appear between the sash and the frame. If they're beyond repair, it could be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window, can also be misaligned, and again it's possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

The next common reason for draughts is window seals. They can become worn down or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them instead of fixing them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.