Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the door and the window is large, you might prefer an alarm system that includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over time, they are susceptible to a range of problems including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows so you can get at the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're happy with the fit, you can tighten the screws until they remain in place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism wearing out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to shut the window and do a test fitting. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking might need to be removed before a new layer can be applied. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you may have to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is essentially a simple process but it can be simpler if you have someone to assist in holding the frame in place.

Make sure that the upvc window repair hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you advice.

It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges, also because of wear and tear, can become misaligned, this can cause a gap to form between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may be unbalanced. This is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace these.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be put on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and there may come the point when it's more economical to replace them than repair them. If you are experiencing issues with your Upvc window you should consult an expert immediately.