Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, you will need to find some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the distance between the window and the door is large, you might prefer a security screen that also includes a window repair. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A sagging uPVC window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll need to open the window to get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the an appropriate fit. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do an experiment fitting. The corners of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and floors that are wet. The leaks of water from windows do can not only cause destruction of your home's structure but also hinder your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease it could be hinges that are at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to change a window hinge, but it's easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also important to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be disaligned as a result of wear, creating gaps where the sash meets frame. They can be fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it's possible to give them a good clean, but in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them than to repair them. If you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.