Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Maintaining Timber Windows

A well-maintained wooden window is a crucial element of a building that is historic. It is a representation of the different materials and technologies as well as the craftsmanship and architectural style of the time from which it dates.

When repairs are feasible to existing windows are required, they should be made in-situ. Repairing the most deteriorated areas of decay can be accomplished by using specialized resin-based systems.

Durability

The windows made of timber in many historical buildings were built to last for centuries. However, they do need to be maintained to ensure they look good and functioning correctly. The most frequently-asked maintenance tasks include sash-cord repairs as well as tightening sash pulleys and painting. There is also a rising demand to upgrade the timber windows to increase energy efficiency. This can include replacing old glazing units, repairing existing window repair cambridge rebates or installing new cills to improve air seal.

The deterioration of paintwork is a major problem with traditional windows. This is especially important in the case of sash windows as the gaps between sashes can be quite large. In these situations, water can penetrate the paint film and cause rotting of the putty and underlying wood. Weather conditions that are not ideal can accelerate the decay. To prevent this, windows should be painted regularly using a suitable exterior wood paint.

In addition to repainting, areas that have corroded should be repaired with an adhesive-based repair product. This will ensure that the maximum amount of the original fabric is retained. It is also essential to limit the number of holes that are drilled into the frame for cable entry since these could allow water in and cause decay.

Another major issue with older windows is structural movement in the wall which can lead to deformation of the frame and sash. This could result in the sash fitting incorrectly and jamming or sticking into the opening, or breaking glass. This can often be fixed by the fitting of new sash boxes that have been made from slow grown deal (pine) or oak. The cill must be constructed from durable hardwood such as oak to prevent movement between the new and existing work.

There are a variety of companies that make Boston pattern wooden sash to fit in with the majority of openings. They are available in a range of sizes and finishes to meet the requirements of the modern homeowner. In conjunction with quadruple draught strip and better thermal insulation these new sash can make significant improvements to the energy efficiency of a house.

Aesthetics

Many old timber frames have a high aesthetic appeal, as they reflect, in some form, the materials technology, the construction process, and the architectural taste from the time period they were made. They could have significant historical value as a set. This is especially true of windows that were unglazed in the early days of timber-framed structures, where the majority were series openings in structural frames that were subdivided horizontally by mullions and vertical iron or wood bars in order to keep out invaders.

Traditional window joinery made from timber can be a stunning feature of a building and it is important to keep its appearance. It is essential that any decay resulting from moisture penetration should be removed as soon as it is discovered. It is recommended to do this with thorough painting, especially if there is damage or degradation. It is advisable to use paints that are specifically designed to be used as part of the system (primer, undercoat and finish) and follow the manufacturer's instructions regarding preparation and the number of coats required at each stage.

Wet rot is a typical issue in old timber windows and the best way to stop it growing is to eliminate sections that are damaged or rotten as soon as possible to prevent the spread of the fungus responsible for it. Replace rotting wood with slow-grown deal (pine), and should it be possible, the same type of timber as the one that is being removed to prevent any differential movement.

Glass became more affordable and abundant in the late medieval era and into the 17th century. In the process, the openings for glazed windows on timber-framed houses were more elaborate, with moulded mullions, wooden tracery and cills that protruded deep. Increasingly, the glazing was set within rebated frames and then pinned with 'glazing sprigs' rather than into lead cames. This method of glazing is not only less prone to leaking but it also allows more expansive, clearer sheets of glass to be used in the windows than would otherwise have been possible without the need for leaded lights.

Energy efficiency

Traditional timber windows are energy efficient because of their thickness and multilayer construction as well as focus on detail. The large glass surfaces, the deep projecting cills, and the large glazing areas help to reduce air infiltration. With secondary glazing and draught proofing, windows can be made more efficient to improve their energy efficiency. However it is essential to keep in mind that any such measures must be considered in relation to the overall appearance and integrity of the original window.

So, retaining the existing windows from the past that require ventilation repair cambridgeshire rather than replacing them is logical particularly when thermal enhancements can be achieved inexpensively with simple repairs and upgrades. Older windows typically have a historical value that shows a variety of technological advances and changes in architectural style. The pressures to replace such windows are generally based on the assumption that old windows will need replacement in the near future, but they are capable of providing service for 150, 200 and even 250 years, if properly maintained.

It is crucial to recognize that the decay issues that are that are typical of timber windows can be avoided by regular maintenance and swift repairs. In addition it is crucial to recognize damp penetration issues and address them swiftly to prevent serious damage. The early deterioration of paint is a concern because it allows moisture to get into the wood, which can cause wet rot. It is not uncommon for this type of damage to go undetected until the paintwork starts to crack or turn curly. However, it can cause structural damage and lead to further decay.

A high-quality paint will stop this moisture from entering. It is also essential to keep the paintwork clean to avoid mould and condensation. Modern synthetic paints are problematic because they are often water-resistant and may cause mildew growth within the foggy window repair frame.

The majority of windows from the past were constructed from timber with an extensive proportion of sapwood. The timbers will deteriorate quickly when exposed to wet weather conditions, but they can be preserved with a thorough treatment of preservative before they are put to use. It is also crucial to ensure that the kind of timber used is well-suited to the location and climate conditions, since these factors affect the durability of the joinery. Local window manufacturers produce various types of timber sash that can be tailored to fit specific historic openings. They can be produced in the standard Boston pattern or in custom sizes to fit the architectural style of historic buildings.

Maintenance

Regular inspection as well as careful redecoration and quick repairs can prolong the lifespan of windows made of timber. The primary cause of decay is moisture intrusion through deteriorated paint and putty. This can be avoided with thorough painting and the use of a good quality wood preservative.

Repairs to old sash windows and frameless casement windows should be done with care and minimal disruption. Many traditional timber window designs are repairable without removing the frame, and this approach should be used whenever it is possible. Remove peeling or loose paint and lightly sand the surface to improve the 'key" of the surface. This will allow the new coating to stick better. It is important to avoid removing old paint layers, as they may have historical value.

When a section of wood is decayed the best way to deal with it is to take it off and replace it with timber inserts designed to match existing profiles. The timber inserts should be treated with wood preservative, and the joint between masonry sub-cill and timber cill should be sealed.

cambridge replacement windows of windows made of traditional PVC-u can be a tempting option, especially when the installer offers a "one-stop shop" installation that handles removal and replacement in the span of a day. It is crucial that the person who installs replacement windows has a full knowledge of the structure and history of traditional timber frames. This will allow them to make appropriate suggestions for improvements to energy efficiency and other technical upgrades that do not alter the character of a historic building. Those who provide replacement windows should be registered under a Competent Persons Scheme such as FENSA. This will ensure that the replacement windows are approved as a suitable option under Building Regulations. It is quite possible for a skilled and experienced carpenter to install PVC-u windows that are sympathetic to the character of the original building. This is especially true when windows are installed in listed buildings or conservation areas.