Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is large, you might think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a number of problems that include sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to open the windows so you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fit. If you're satisfied with the fit, tighten the screws until they stay in the right place.

If you cannot reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

upvc window repairs near me handles can also become loose. This is often caused by screws that have become undone over time, but it could also be due to the handle mechanism wearing out. It's fairly simple to repair a loose upvc window repairs handle. You'll first need to close the window and perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung upvc window repairs near me windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process, but it's simpler if you have someone to help you hold the frame up.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a picture via our website and we will be pleased to offer you advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they could damage your upvc window repair near me windows.

5. Draughts

Draughts in upvc window Repair windows can be caused by a few various factors. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear where the sash meets the frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. The interlock may also become unbalanced. This is located on the hinge's side, and could require to be cleaned. In some instances it might be necessary to replace these.

The next common reason for draughts are the window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will continue to provide excellent insulation and security for your home. It is important to remember that all windows eventually wear out and it is more cost-effective to simply replace them than to repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional immediately.