Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

Over time, the handles on your doors will wear out and need to be changed. When doing this it is crucial that the new handles conform to the dimensions of the handle that was previously used.

The top screw position as well as the lever and keyhole sizes are the three measurements you need to check. Use the size guide to aid you.

Inline Lever/Lever

A lever handle or lever is a modern door handle designed to work with new or replacement doors. This kind of handle is available in many styles and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are constructed of durable materials and are perfect for multi point lock doors which require a robust design. The handles are inline and operate from the same spindle and screw fixings. They are easily installed on existing or new uPVC/Composite doors.

The handle can be placed and angled to accommodate the needs of all users. The handle has been tested for endurance up to 200 000 cycles. This ensures that the quality of finish and performance over time. The lever that springs is adjustable to fit a wide range of locks. This is especially useful for narrower door frames in which the cylinder is further back. A shorter lever is an excellent option for doors where the latch could be activated by the thumb turn located on the inside.

Lever Pad

The lever pad upvc handle differs from the lever handles that are used on the majority of doors. The handle can use a single spindle (inline) or independently from each side by using two offset or inline spindles (pad). They are commonly employed on UPVC doors with double glazing. They are available in a range of finishes & variations.

The handles are available in various finishes, including White Chrome and Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All UPVC levers for handles come with a spindle, screws and can be installed on a uPVC door. The 211mm backplate fixing centres allow for a larger size handle that is often a benefit when replacing a faulty or worn multi-point door lock mechanism. These levers for handles and hinges are also spring-loaded, which solves the issue of door handles sagging from their horizontal position when not in use.

When selecting the replacement double glazing handles UPVC handle and spindle, it is important to match the PZ dimensions of both the multipoint lock and the uPVC door. This measurement is also known as the 'handle centre' or 'cylinder centres' and is a critical aspect to match the correct handles.

After you have identified the correct size of PZ and the correct PZ size, you must make sure that the push and lever pads are shaped to match the American with Disabilities Act compliant handles you require for your door. These are typically round or square with an internal lever, and an external push pad.

The majority of UPVC Lever Pads that we sell are sprung. This means they will return to a horizontal position when not in use instead of hanging and possibly securing to the frame. This prevents drafts and cold air from entering a property. You will also find that the majority of the UPVC handle lever pad style handles are hand-operated that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are typically used on uPVC doors, but can also be found on other types of doors. They operate by using a key to unlock a cylinder that will reveal pins that can be aligned to those in the lock body and allow them to rotate an revolving cam, opening the door handles victorian. Euro cylinders can be equipped with up to six pins, with external and internal doors generally needing different levels of security.

Choosing the right cylinder is essential; it is dependent on the way your door and handle are utilized. For instance, doors that are external must be secured with a more secure cylinder whilst internal doors can be secured with the standard cylinder. In addition, some cylinders are available with extra features that can improve security, for instance anti-drill or anti-bump features.

A euro cylinder needs to be measured correctly to ensure that it is the correct size for your door. The cylinder should be measured from the hole for fixing screws in the middle to the end of the cylinder including the thumb turn if you have one. It is recommended to do this while the lock is in place however, in the event that this is not possible, you may take it off to measure. A cylinder that protrudes beyond the handle and escutcheon could be vulnerable to attacks, such as snapping locks, therefore it is crucial to make sure it's not too long.

The design of most newer cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce the chances of an attack by causing the cylinder to rotate in an opposite direction. This can help prevent attacks and protect your doors.

Certain cylinders are made to withstand snapping. This is a more frequent type of attack on cylinders where the break line in the lock is attacked by a tool that is specially designed to snap off the front of the cylinder to allow the door to be opened. This is much quicker and less difficult than opening multipoint locks and leaves no evidence of a burglary, which can hinder an insurance claim.

Spring Cassette

This spring cassette sits within the base of the door handle backplate, providing a spring solution that returns your multipoint lock handles to their rest position after using. In the past, a lot of these types of handle did not have a spring integrated into them, and as a result, they are more likely to slide or drop once the locking mechanism is disengaged. Adding this simple component is one of the best methods to correct this, and is an excellent way to stop your doors made of upvc from becoming stuck in either closed or open position, as these aren't always simple to manually close by hand.

These spring cassettes are specifically designed for use with multipoint locks sprung, they will not fit unsprung multipoint handles and you will need to have a custom hole cut into your backplate in order for them to fit (please see image for technical diagram). They are a replacement for damaged or missing cassettes inside the door handle backplate of many kinds of uPVC doors. They feature a square cut out which accommodates an 8mm spindle and they are supplied individually.

These spring cassettes offer a great value solution to the problem of door handles that have become sagging. They are easy to fit and will prolong the life span of your uPVC doors. For more information on our wide range of uPVC spares and accessories contact us today. in touch with our team. We are always ready to offer expert advice and support you.