Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are several reasons why the ignition of your car could be locked. One reason is that the key is dirty or has a damaged wafer in it. You can fix this by sliding the key into and out of the cylinder several times.

The pins on the lock cylinder can also be stuck. You can tap the cylinder gently using a small tack-hammer.

Check the Battery

The transmission shifter switch may be malfunctioning if the vehicle is in Park neutral or will not start when the key is switched on. You can fix this by moving the gear shifter upwards or down to get the car into gear.

If the car ignition lock - from the Intersex blog - doesn't turn, the problem could be related to the neutral safety cable or the transmission shifter. A mechanic or an auto locksmith can easily solve these issues.

It's also possible that the ignition cylinder has worn out. Over time the ignition as well as the key can wear out making them difficult to remove or insert. A lubricant, such as silicon lock lubricant, can aid in solving this issue by allowing the silicon wafers to slide into place.

The filth from your pockets and adhesive from tape that holds packages together can build on the key, preventing it from being able to slide into the ignition. You can clean the keys with a cloth or a cleaner such as Triflow to resolve this problem. You can also test a spare key to determine if the issue is the key or ignition.

You can also tap the key with a small hammer, when it's in the ignition. This will create a tiny vibration, which may cause enough vibration to loosen the wafers in the ignition and let them slide into place. You should be careful not to scratch the ignition cylinder or key.

If none of the suggestions above work, you need to consult a locksmith for help in figuring the issue. The key may be damaged inside the ignition cylinder, or it might be time to replace it altogether. Locksmiths can create an alternative key if the problem is the key. If the problem is related to the ignition cylinder, your car must be taken to a repair shop in order to get it replaced. Luckily, these problems are generally easy to repair.

Examine the Steering Wheel

A steering wheel that is locked can cause the ignition to not turn. It can happen when a driver accidentally engages the steering wheel as they exit or get into the vehicle. This is usually caused by yanking the wheel and being able to hold it against their body. It can also happen if a passenger in the rear seat has a mishap and engages the brakes while they get out of the vehicle.

Fortunately, this is an easy fix that does not require a trip to an expert locksmith or mechanic. First, ensure that the gear shift is in neutral or Park. If it's not then gently pull or push the gear shifter until it moves to one of these positions. It is also essential to press the brake button or activate the handbrake prior to attempting to turn the key.

If the wheel is not locked, a quick inspection of the steering column should determine if the key is in contact with the lock cylinder. A small "Lock label is typically located in the lower area of the ignition circle. It is possible to disengage the lock by gently jiggling the key or pulling it back with moderate force. It is essential not to apply too much pressure, as this could cause damage to the key, or even break a wafer within the lock cylinder.

A spare key can also be used to disengage the lock. This could indicate that the original key has damaged and no longer able to engage the wafers inside the lock cylinder. A professional from Karl Chevrolet Webster City can create a new key if this is the case.

If the new key won't engage, a quick spray of penetrating oil could assist. Apply a small amount of oil around the ignition and keyhole, then tap or jiggle it until it starts to engage. If this doesn't help, you may need to consult a specialist in your local dealership for cars. They'll be able give you a new key and replace the ignition cylinder, in the event that it is required.

Check the key ignition replacement

If you're unable to get your key to turn on the ignition, it's likely that there is something wrong with your key. Try taking off any foreign material on the key (lint, adhesive from packing tape, etc). You should also try rubbing alcohol or Goo Gone on the key to see if this can help.

It's possible that the internal lock pins aren't moving correctly when you insert the key. If you have an extra key to test, you can put it into the ignition and gently pulling it out. This should allow you to be able to feel and hear if internal lock pins move, which they ought to. If not, you can grease the pins using graphite powder. You can buy graphite in small tubes that can be applied directly to the keyhole. This should help the pins to slide into position when you insert the key, and prevent them from becoming stuck.

A more serious issue is that it has damaged or worn out, making it unable to connect the internal pins inside the ignition cylinder. This may cause the cylinder of ignition to not turn and prevent you from starting your vehicle. If this is the case you'll need to take your car to a locksmith or repair shop for assistance.

If you are able to turn your vehicle with a spare key and you've ruled out issues with the steering wheel or battery It could be that the ignition cylinder is worn out. Try to open the lock with an abrasive screwdriver or handle of a small hammer. Do not use the head. Often, tapping gently on the cylinder will loosen it to allow you to turn the key of your car. If this is not working then you'll need to have the lock cylinder replaced by a mechanic.

Check the Ignition Socket

The ignition socket is the place your key is inserted and slides out of place when inserted. It could get blocked with dust, or simply wear and tear. You can squirt some silicon lock lubricant into the ignition.

You can also use a small hammer to very gently tap the inside of the ignition cylinder, to try to loosen or reset the pins which may be out of alignment. Again, be very careful not to overdo it or you could cause major damage to the ignition switch.

It is essential to ensure whether your car's transmission is set to park or neutral before you attempt this. Many newer cars have a system that can lock the steering wheel when it is not in park or neutral, which can prevent the key from turning into the ignition.

If you've done all of this and still can't get your key to turn it is likely that the housing of your ignition cylinder is in need of replacement. Different vehicles have different methods for replacing the ignition cylinder, so it is crucial to follow the correct procedures.

Generally, this means taking off the plastic cover that is placed over the steering column and ignition assembly. To remove it, you'll need adjust the tilt-wheel to its lowest position. Then, remove any fasteners holding it in place.

Once the cover is removed, you will need to remove the old ignition cylinder off the steering column. Then, you'll have to check the new ignition cylinder that you purchased with the one you removed to ensure that they are identical. Once this step is complete, the new ignition cylinder is able to be installed in the same manner that the previous one was removed.

Sometimes, despite all of our best efforts, the ignition cylinder lock repair may become damaged and need to be replaced. It is recommended that if this happens, you call an Tempe Locksmith. A locksmith can help you determine the correct replacement and ensure it is installed correctly to ensure that your vehicle will start again.