Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Add Warmth to Your Home With a Fireplace Wall Mount

Bring warmth and ambiance to your office, home or commercial space by installing a fireplace wall mount. These units are generally easy to set up and come with mounting brackets to hang or recessing into a wall.

Follow the directions on the site of the manufacturer to make a simple, quick installation. Make sure that the bottom of the fireplace and wall-mounting bracket are able to meet. Then, Stone Fireplaces (Https://Www.Humansoft.Co.Kr/) you can secure the fireplace to the wall.

Size

A wall-mounted electric fireplace can be an impressive focal point to any room, creating ambiance and warmth. These fireplaces are available in various sizes that can be adjusted to suit any space. A smaller model is perfect for a bedroom while a larger one can be utilised in the living room or family room. Some models offer an option to install them flush against the wall for an uncluttered appearance.

The height of the fireplace wall mount can influence the way it appears within the room. Many people place them higher on the wall to create a dramatic effect. They usually sit six to 12 inches above the floor. Others prefer to place them at the normal TV height of 4.5 to 5 feet that allows the fire to be seen from a variety of places in the room.

Regardless of the size you decide to go with it is important to consider a few aspects to take into consideration to ensure that your fireplace is safe and effective. For instance, you should make sure that all combustible things are kept at a minimum of three feet away from the fire, including drapes and furnishings. If possible, you should also fix the mounting brackets to the studs. If you are unable to locate studs, you can use anchors made of plastic. This will ensure that the fireplace won't be pulled away.

Another important factor to consider when choosing the right fireplace wall mount is the amount of heat it produces. As a rule, choose one that produces around the same amount of heat as an ordinary electric heater. This will ensure that your fireplace can provide enough supplemental heat for the entire space.

Certain fireplaces come with distinctive features that set them apart from other fireplaces. For instance, some fireplaces offer remote control with adjustable brightness settings and no-heat modes. They also have cool-to touch glass and realistic LED flames. Other important features include a built-in shelf that can be used to store electronics, and an easy installation procedure that doesn't require any expert assistance.

Installation

Contrary to a built-in electric fire that requires hard-wiring into the electrical system in your home, a fireplace wall mount is semi-permanent. It can be mounted directly on a wall, or in a bracket that is then attached to the wall. It is important to select an area that is close enough to an outlet to allow the power cord to reach it, while giving enough space other objects. This is in accordance with the manufacturer's guidelines in the owner's manual.

Plug it in and experiment with the LED lights and settings prior to when you start the installation. This will let you know whether it is ready for installation or if it needs to be checked further.

Next, prepare the area in which you'll be installing your fireplace wall mount. Depending on the model, you may need to install a bump-out in the wall. You may also decide to cover the existing wall with drywall. In the latter case it is recommended to use drywall methods like tape and mudding. Allow it to completely dry before continuing.

After the walls have been made and the brackets are attached to the wall using screws. These brackets should be placed into the studs that are behind the drywall. This will stop the fireplace from coming loose from the wall in the future.

Once the bracket has been secured, it's time to mount the fireplace. The model can vary but there will typically be a ledge at the point where the fireplace sits and a place to connect the bracket to. It is then possible to add any additional media like logs, embers or stones inside the fireplace.

Certain models let you attach the firebox and the screen to the wall bracket. This makes the installation even simpler, but it is important to ensure that everything is fitted well and is secured prior to closing.

Once the fireplace is in position, you can complete the appearance by tacking or screwing the bracket to the wall and cutting any wires that aren't needed. If desired, you can also use paintable wire covers that will camouflage your power cord.

Safety

A fireplace wall mount lets you to heat your home while saving valuable floor space. However, it is essential to be cautious when using this type of fireplace. To avoid electric shock the first step is to ensure that the fireplace is grounded. You should also be sure to follow the manufacturer's instructions to ensure proper use.

It is possible to buy wall-mounted electric fireplaces that don't produce heat, but the majority of them come with an electric heater to increase the realism of the flame effects. It usually takes the form of a fan-forced heater that blasts air through a heating element, however, some models might include an infrared heater too.

Once the fireplace is mounted it is important to be cautious not to touch the hot surface since this could cause burns and damage to the appliance. To avoid the risk of fire keep combustibles at a minimum of three feet away from the fireplace. Also, be sure not to block the vents at the side of the unit.

There are a few other safety features to look for when selecting an electric fireplace electric wall mount. For instance, check that the unit has an emergency shutoff switch to prevent fires or overheating. It's also a good idea to choose a unit with a lower output of heat, as it will help save energy.

The material used to surround is also crucial. It is important to select an option that is safe for children as well as pets like glass, steel or wood veneers. You should also choose a model that has a display or remote control to make it easier to use.

There are many different types of electric and ethanol wall-mounted fireplaces. The one that is right for you will depend on your budget and the style of your home. No matter if you opt for an electric or ethanol fire (use Gstd) fireplace, you can be sure that it will bring the warmth and sophistication to your home. Always follow the safety guidelines given by the manufacturer and keep your family and pets safe when using this fireplace.

Style

The style of a fireplace wall mount determines the way it appears on the walls of your home. Certain models are designed to stand out and others blend in with the rest of your room's decor. A modern model like the Streamlined electric wall fireplace has a sleek front face with a minimalist design. It has top venting that allows heated air to flow freely while keeping the fireplace’s stylish design. Its flat mount and simple-to-use remote make it a breeze to operate.

You can also find electric fireplaces that are wall mounted with more traditional-looking mantels. These fireplaces are ideal for homes with an open hearth, or who wish to convert their wood-burning fireplace into an electric fire without a chimney. Flat-wall fire places are available in a variety of sizes and include shelves to display your decorations. These fireplaces are ideal for bedrooms, living spaces and home offices.

A gas wall-mount fireplace is a good option for those looking to add a cozy, inviting vibe to their space. These units have the traditional log set and are available in different frame finishes, including black and natural stone. They also come with an ember bed that can be customized and LED flame color options to give a custom, personalized touch. Some models even come with a built-in TV mount to provide additional functionality.

Some models are designed to be mounted directly on the wall, while others can be recessed partially or completely into the wall. The Allusion wall-mount fireplace has a tiny footprint which permits it to be installed into 2x6 frame walls. But, you can put a trim skirt on the exposed part. The Allusion also comes with a convenient remote control as well as a variety of heat settings, so you can enjoy your fireplace year-round.

Surface-mounted electric fireplaces typically project from 4" to 6.5" into the room, so they're easier to install than models that are built into the wall or constructed from an existing wall cavity. They're also a great option for renters who don't want to deal with the hassle of drilling into their walls. If you move, you'll be able to easily remove or reposition your fireplace.