Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall onto the cloth instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the window and the door is large, you might want to use a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time, they can suffer from a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window repair near me watertight and draughtproof.

UPVC handles can also loosen. This is usually due to screws that have loosened over time, but it could be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The corners of the sash need to align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak is coming from between the glass in your double glazed window repairs glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be hinges that are at fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is essentially a simple procedure, but it is easier to do when you have a person to help you hold the frame up.

Verify that the uPVC hinges are open and closed in the proper direction. This can be done by checking for the arrows on each hinge, this shows which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be misaligned due to wear, causing an opening where the sash meets frame. They can be repaired by giving them good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge of the window repair, may also be misaligned, and again it is possible to just give them a clean but in some instances it could be necessary to have these replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping can help stop draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it could be cheaper to replace them rather than repair them. If you have any problems with your upvc window you should consult a professional as soon as you can.