Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

upvc Window Repair windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional comes out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is large, you may be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll need open the window to access the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you aren't able to move the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Based on the severity of the issue the caulking that was used up might need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler with someone else to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a photo on our website. We will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window repair sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become unbalanced due to wear, causing a gap where the sash and frame meet. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is on the hinge side of the window, can also become misaligned, again it may be possible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as you can.