Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Repairing Window

Many windows require repairs to ensure that they open and shut properly. If the seal is damaged and is causing your energy bills to rise or your home to feel drafty, repairing your window can save you money in the long in the long run.

Stiff hinges can often be repaired with a bit of oil or using an ratchet tool that loosens the operator cover. Repairing a damaged or cracked window is also possible for a DIYer.

Broken or cracked glass

If your window is cracked or broken glass, it's important to address the problem as soon as possible. The crack can get worse when left untreated and could cause airflow problems within your home. A professional can assist you if you're not sure of your ability to repair the crack on your own.

There are several ways to repair your window depending on the severity of the crack. The simplest option is to apply clear tape to the crack. This will protect your family members from being smashed by glass shards, while allowing air and sunlight to pass through the space. If you'd like taking it a step further, you can use epoxy. This is more labor intensive however, it can produce an attractive final product.

First, you'll need to clean around the crack. Mix a bit of soap with water, then dip a cotton rag into it. Next, you need to carefully clean the crack to remove dirt or debris. After the window has dried, apply the epoxy according to the directions on the packaging. When the epoxy has cured it is possible to use a putty knife to scrape off any excess and smooth the surface by sanding it.

Stress cracks are the most frequent kind of crack that can be found in a window glass in a home. They usually begin near the edges of your window and spread throughout the pane. These are typically caused by temperature fluctuations in your home, and they can become worse over time.

For double-pane windows, you'll need to replace the entire window if one pane breaks. These windows are made of two parts that function as a unit. This is not the same as regular windows which can be replaced by frames that are new.

To replace the glass pane on double-paned windows, you will need to remove the glazing points or clips that hold the window in place. If you're replacing a broken pane, make sure you keep track of the pieces so you can replace them in the future. For other types of windows it is necessary scrape away the old putty, and then apply it to the new pane.

Stained Glass

The tiny pieces of glass that compose stained glass windows are hard and fragile. Rough treatment, impact with hard objects or a sudden change in temperature can cause cracks and break the glass.

The good news is that if the piece of glass is broken, it may be repaired and free from the expense of replacing the panel and removal. Experts in stained glass can repair the damage by employing a variety of techniques that include refoiling, releading or soldering. They can also paint or patina or add new glass.

It can be challenging and time-consuming to repair or replace damaged stained glass. It is important to hire an expert who is familiar with the various methods of repair and can select the best one for your particular project. Each repair method has its own strengths, reversibility, as well as visual effects. This is why each should be assessed separately.

Re-leading is one of the most commonly used methods of repairing damaged glass. A skilled craftsman will bend a piece of soft ductile lead, known as came, back into shape to accommodate the crack. Once the piece is bent, it can be soldered in place and cement is used to hold it in place. After the new cement has cured the crack can be cleaned, polished and sealed.

Another way to fix cracked leaded glass is by spotting the crack and then replacing the glass. This is a more labor intensive and costly process, but it is a viable option. The broken piece of glass is removed, cleaned and sanded down to smooth the surface. Then pincers or a lead knife are used to remove the old lead and clean off any oxidation or growth. After the old lead has been removed the sanded glass surface is cleaned and the new lead is welded into the place.

An easier option for repairing sagging stained glass is to add reinforcing bars to the window. They are rebar-like supports that are positioned across the interior side of the lead and attach to the frame in order to stop the glass from sliding. The bars are often hidden behind decorative foiling, making them virtually invisible.

Muntins or Mullions

The term "muntin" is familiar to people who are familiar with windows. These wood strips in vertical form divide the panes of traditional windows with multi-panes. They are typically employed in older homes to preserve the authentic appearance and are often required by city ordinances for building or renovating in a historic district. Modern replacement windows typically utilize muntins to enhance the appearance of the window, rather than for the strength and stability. But, they can get damaged and if they're broken or rotting it is possible to replace them with new pieces.

Many window repairs companies today don't differentiate between mullions or muntins because they all have the same function. The terms are often used interchangeably but when you're replacing windows, it's important to know the distinction between them to ensure that you and your contractor are on the same page when discussing the details of your project.

A mullion is a vertical support that holds several panes of tempered glass. This was an essential feature prior to the advent of glass manufacturing technology because larger pieces were almost impossible to manufacture. Nowadays, windows do not require mullions as frames are made of two glass units and then glued to each other. Mullions are often used in older windows to give support, and they're also often used for aesthetic purposes.

If your mullions are showing signs of aging, you can easily fix them by putting a dot or two of silicone on both sides of the muntin. Then, press it back into the frame. If you're replacing a horizontal part it is possible to use a copingsaw remove the old muntin, and then make the ends of the new muntin using the aid of a file. If you wish to blend in, buy an entirely new muntin that is slightly different from the original.

Certain IGUs include muntins (real mullions) and muntins (replicas) that are constructed in the unit solely for effect. If you are having issues with these components it's likely that it's time to replace your window.

Frame

You don't want to ruin the appearance of your frame by painting it however if you have to touch it up you can use a sanding sponge on the fine grits to get rid of any paint or stains. Use a dry rag to clean it again. Pay special attention to the corners at the mitered joints. If the joints have opened a little and you are unable to close them, try closing them gently, and use wood glue to keep them together again. You can also apply vinegar in these areas to break down old adhesive. However, you might need to test the vinegar on a few corners before applying it to the entire area.

If the loose corners are an issue, you can usually disassemble the whole frame to get them in and then follow the steps 3 to 8 to fix the problem. However, if the gap is only on one side, you may be able to pull the joint slightly without removing it.

If the corners are utterly broken and the frame is completely broken, you'll require a small clamp, wood glue, and needle-nosed pliers. If only the top and bottom corners have split You can usually hammer finishing nails (those are tiny nails that are very similar to the size of the head) into the corner of the frame, to keep it securely in place after the glue has dried. It is important not to place the nails too close to the corner, or you could weaken it. You can reinforce the corner with carpenter's glue and a hammer or wood putty.