Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. However when you have double pane windows that are secured by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case you'll need locate some plastic spacers that help the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap between the door and the window is large, you might want to use security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform a test fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any DIY expert. Depending on how severe the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed window repairs near me, it is more likely the issue is more with the seal rather than the frame. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze it could be hinges at fault. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a very simple process but it can be easier to do with someone else to assist in holding the frame up.

Check that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us photos through our website can often resolve the problem. We are more than happy to provide advice.

It is also essential to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your upvc window repairs windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash meets the frame. They can be repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can be misaligned. Again, it is possible to give them a good clean, but in some instances it could be necessary to have them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc window repair [click here for more info] will continue to provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.