Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. However, if windows with double panes are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this instance, you will need to source some plastic spacers that help the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the distance between the door and the window is substantial, you may want to use security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action when you realize that your Upvc Window repair windows are sagging.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the handle mechanism wears out. Luckily, it's not difficult to repair the loose uPVC window repair handle yourself. First, you'll need to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window repair. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze it could be hinges at the fault. These are easily repaired by any skilled DIYer and can usually be done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a very simple process but it can be easier with someone else to assist in holding the frame up.

Check that the uPVC hinges are open and closed in the right direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give assistance.

Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. First, the hinges because of wear and tear, may become displaced, which causes a gap to form where the sash joins the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window, may also become misaligned, again it may be feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.