Company Logo

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However, if you have double-pane windows that are held in place by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep drafts and water from entering your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the door and the window is large, you might prefer security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window to access the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. The first step is to close your window and do an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to upvc window repair near me window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates which way the window repair near me should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become disaligned as a result of wear, causing gaps between the frame and sash. If they are beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next common reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be placed on the windowsill on top. They can keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them than to repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as possible.